If your Apple Television set doesn't plow on

Notice out what to practice if your Apple TV doesn't turn on, brandish video or has a flashing status light.

Effort these steps

After each step, see if your issue has been resolved.

  1. Unplug both ends of the HDMI cable, then firmly plug them dorsum in. Or attempt using a different HDMI cable to see if it's the cable that'due south causing the event. And then in the television bill of fare, make sure you select the HDMI input that matches the HDMI port continued to the Apple TV.
  2. Unplug your television and your Apple TV from power, and so plug both of them dorsum in.
  3. Try to restore your Apple TV.

Even so need aid?

  • Try a unlike HDMI port on your television, starting with HDMI 1 or Input 1.
  • If yous see the Apple tree logo and and then a black screen, hold Menu and Volume Down for v seconds, so release. Your Apple TV will switch to a new resolution every twenty seconds. Select OK to choose a resolution or Cancel to quit.
  • If you're using a receiver or an HDMI switch, ane of these may exist causing the issue. Connect your Apple tree Boob tube straight to the television instead of using the receiver or HDMI switch. If you're now seeing the Apple Tv set Abode screen, connect your receiver or HDMI switch one at a time. Once each additional device has been connected, check that you still see the Home screen on your television.

If you yet can't see a motion-picture show on your television, hear sound or only meet the Apple tree logo, contact Apple Back up.

Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple tree, is provided without recommendation or endorsement. Apple tree assumes no responsibility with regard to the selection, performance or utilise of third-party websites or products. Apple tree makes no representations regarding tertiary-party website accurateness or reliability. Contact the vendor for additional information.

Published Date: